Home

News

Concepts

Canada Unveils Project Arrow EV Concept With 3D-Printed Chassis

The fully functional concept vehicle is made of 97 percent Canadian parts.

Project Arrow EV concept

Dan Mihalascu Dan Mihalascu

By: Dan Mihalascu

Jan 19, 2023 at 4:02pm ET

Add InsideEVs as a preferred source in Google

Share

Comment

Three years after announcing the ambition to build a brand-new electric vehicle, Canada's Automotive Parts Manufacturers' Association (APMA) has unveiled a fully functional concept vehicle of its Project Arrow EV.

Developed to showcase of the skills and technologies available from Canadian suppliers, the Project Arrow has been unveiled in concept form at CES 2023 – on time, under budget, and with 97 percent homegrown content, according to APMA head Flavio Volpe.

The vehicle you see in the photos was designed by four students from Carleton University's School of Industrial Design and built at Ontario Tech University's vehicle engineering facility using components from nearly 60 suppliers, including from the critical minerals sector.

Financing for the project came from Canada's federal government and several province governments, which contributed a combined $8.2 million, Driving reports.

Gallery: APMA Project Arrow EV Concept

Project Arrow EV concept

5

APMA Project Arrow APMA Project Arrow APMA Project Arrow APMA Project Arrow

While there aren't that many available details on the electric crossover, the powertrain consists of an 82.5-kWh lithium-ion battery offering a range of around 310 miles (500 kilometers), thanks in part to assistance from the solar-cell roof panel.

The battery powers two electric motors – one on each axle for all-wheel-drive capability – with a combined output of 550 horsepower. This setup enables the Project Arrow EV to sprint from zero to 62 mph (100 km/h) in 3.5 seconds. APMA also mentioned the EV features Level 3 autonomy as well as a smart cockpit and cybersecurity tech.

The association has no plans at the moment to build another prototype, and won't put the existing one through crash testing either. Mind you, the crossover was engineered to meet Canada's safety regulations for road legality with commercially ready parts that can be built in quantity on an assembly line.

 

At this stage, APMA does not have plans to put the Project Arrow into production. The vehicle is first and foremost a showcase for Canadian parts suppliers who want to sell real parts to automakers.

"Anybody who is considering Canada for electric vehicle assembly, number one we have all the components here, and Project Arrow shows it to you without giving you theoretical BS. Number two, it says we have all the technical know-how and people required to do this successfully."

Flavio Volpe, APMA president

What do you think?

View

Comments

Most notably, the Project Arrow features a 3D-printed composite chassis made by Xaba, a Toronto-based software, engineering, and robotics startup. Using specially constructed composites from Dartmouth-based Meta Materials, Xaba's Intelligent Machine 3D-printed the entire chassis (see details in the video below).

Following the world debut at CES 2023, the Project Arrow EV concept will make appearances at the Detroit, Los Angeles, Toronto, and Montreal auto shows this year, in addition to visits to various OEMs to demonstrate its technology.

YouTube video player

More stories on EVs developed as part of national projects

Turkey's National Carmaker Togg Starts Production Of 2023 C SUV EV

ElectroMobility Poland Presents All-Electric Izera

Source: Driving.ca via Autoblog

We want your opinion!

What would you like to see on Insideevs.com?

Take our 3 minute survey.

- The InsideEVs team

Share this Story

GO TO COMMENTS

(

)

Got a tip for us? Email: tips@insideevs.com

View all comments ( )

Trending

Lucid Is Slashing $15,000 Off The Gravity, But The Deal Won’t Last Long

Lucid Is Slashing $15,000 Off The Gravity, But The Deal Won’t Last Long

The Remnants Of The Electric Saab That Never Was Are Going Up For Auction

The Remnants Of The Electric Saab That Never Was Are Going Up For Auction

What We Both Thought After Driving The Rivian R2

What We Both Thought After Driving The Rivian R2

Aptera Finally Built Its First Car For Customer Delivery

Aptera Finally Built Its First Car For Customer Delivery

Latest Stories

RECOMMENDED FOR YOU



The Volkswagen ID. Polo GTI Clubsport Is A Two-Seat Track-Ready EV



BYD's Latest SUV Can Hide Its Steering Wheel When You Don't Need It



Polestar’s Next EVs Will Borrow From This Gorgeous New Concept



What We Both Thought After Driving The Rivian R2



The New Citroen 2CV Van Is The Perfect Match For Trendy Baristas



Hyundai’s N Vision 74 Was One Of The Coolest Car Designs In Recent Memory. Now It's Shelved



Peugeot Revives The RCZ As A Sexy Solid-State Sports Car