Home

News

Charging

ORNL Demonstrates Bi-Directional Wireless Charging For UPS Medium-Duty Truck

It's 92% efficient even across an 11-inch air gap.

ORNL demonstrates bi-directional wireless charging on hybrid UPS truck

Mark Kane Mark Kane

By: Mark Kane

Apr 26, 2020 at 6:34pm ET

Add InsideEVs as a preferred source in Google

Share

Comment

The Department of Energy’s Oak Ridge National Laboratory (ORNL) announced recently that in late February it successfully demonstrated a new bi-directional wireless charging system, developed for medium-duty vehicles, with a bigger air gap.

The new system is able to transfer 20 kW of power across an 11-inch (28 cm) air gap at 92% efficiency in UPS's plug-in hybrid electric delivery truck.

"The project is the first of its kind to achieve power transfer at this rate across an 11-inch air gap, advancing the technology to a new class of larger vehicles with higher ground clearance."

According to ORNL’s Omer Onar, who led the technical team’s effort at the lab: “There’s no off-the-shelf solution that can deliver 20 kilowatts across an 11-inch air gap with these efficiencies.”

See also

GreenPower Motor To Offer Wirelessly-Charged Electric Buses

120-kW Wireless Charging Proves 97% Efficient

UPS To Test Gaussin All-Electric And Autonomous-Enabled 'Shifter'

UPS Invests In Arrival And Orders 10,000 Electric Vans

"The technology takes energy from the grid and converts it to direct current (DC) voltage. Then a high-frequency inverter generates alternating current (AC), which in turn creates a magnetic field that transfers power across the air gap. Once the energy is transferred to the secondary coil across the air gap it is converted back to DC, charging the vehicle’s battery pack.

The system incorporates ORNL’s custom electromagnetic coil design and controls system, as well as  wide bandgap power conversion systems."

ORNL developed its first wireless charging system in 2016, but it was then envisioned for cars. The 20 kW was 90% efficient across a shorter air gap. Then, in 2018, it was scaled up to 120 kW and 97% efficiency across a 6-inch (15.2 cm) air gap.

What do you think?

View

Comments

As the new system is bi-directional it could turn an electric truck into mobile energy storage to support renewable energy generation or peak electricity demand. ORNL notes that 50 trucks connected simultaneously would provide up to 1 MW of power.

"With its bi-directional design, the system also supports use of the vehicle’s batteries for energy storage. Doing so would give energy flexibility to a fleet owner’s business, and help better manage on-site generation such as solar power."

Source: ORNL via Green Car Congress

We want your opinion!

What would you like to see on Insideevs.com?

Take our 3 minute survey.

- The InsideEVs team

Share this Story

GO TO COMMENTS

(

)

Got a tip for us? Email: tips@insideevs.com

Hide press release Show press release

Successful delivery: ORNL demonstrates bi-directional wireless charging on hybrid UPS truck

April 21, 2020

Researchers at the Department of Energy’s Oak Ridge National Laboratory (ORNL) in late February demonstrated a 20-kilowatt bi-directional wireless charging system installed on a UPS medium-duty, plug-in hybrid electric delivery truck. The project is the first of its kind to achieve power transfer at this rate across an 11-inch air gap, advancing the technology to a new class of larger vehicles with higher ground clearance.

ORNL’s wireless charging technology transferred power between the truck and a charging pad across the 11-inch gap using two electromagnetic coupling coils at the demonstration. The system transferred electricity from the power grid to the vehicle battery terminals at more than 92% efficiency.

At a 20-kilowatt level, it would take about three hours to charge the vehicle’s 60-kilowatt-hour battery packs. Conventional wired charging typically takes between five to six hours using the existing onboard charging system.

With its bi-directional design, the system also supports use of the vehicle’s batteries for energy storage. Doing so would give energy flexibility to a fleet owner’s business, and help better manage on-site generation such as solar power. ORNL’s bidirectional technology is fully compliant with grid power quality standards.

“Scaling the technology to a fleet of 50 trucks gives you megawatt-scale energy storage,” noted ORNL’s Omer Onar, who led the technical team’s effort at the lab.

The technology takes energy from the grid and converts it to direct current (DC) voltage. Then a high-frequency inverter generates alternating current (AC), which in turn creates a magnetic field that transfers power across the air gap. Once the energy is transferred to the secondary coil across the air gap it is converted back to DC, charging the vehicle’s battery pack.

The system incorporates ORNL’s custom electromagnetic coil design and controls system, as well as  wide bandgap power conversion systems. The technology was tested using grid and battery emulators before integration into the vehicle, utilizing two unique facilities at ORNL: the DOE National Transportation Research Center user facility, and the lab’s Grid Research Integration and Deployment Center.

The project leverages ORNL’s expertise in vehicle systems integration as well as power electronics engineering. “There’s no off-the-shelf solution that can deliver 20 kilowatts across an 11-inch air gap with these efficiencies,” Onar said.

The technology “represents an integrated, holistic solution for vehicle electrification that also advances the next-generation smart grid,” Onar added. “The system expands the possibilities for fleets who want convenient, efficient EV charging as well as electricity storage solutions.”

“UPS appreciates the Department of Energy’s support on this effort,” said Mike Whitlatch, vice president of Global Energy and Procurement for UPS. “This project demonstrates innovative ways to utilize vehicle battery storage at fleet scale to power the vehicle, add resiliency to our facilities and support the grid.”

Oak Ridge researchers first demonstrated a 20-kilowatt wireless charging system on a light-duty passenger vehicle in 2016. The technology for light-duty applications has since been scaled up to 120 kilowatts, advancing the goal of wirelessly charging a typical consumer’s electric vehicle in about the same time as a gas station fill-up.

The technology is undergoing further testing and analysis as part of the project, which is supported by the DOE Office of Energy Efficiency and Renewable Energy’s Vehicle Technologies Office.

ORNL is managed by UT-Battelle for the U.S. Department of Energy's Office of Science, the single largest supporter of basic research in the physical sciences in the United States. DOE’s Office of Science is working to address some of the most pressing challenges of our time. For more information, please visit https://energy.gov/science.

View all comments ( )

Trending

‘We’re Moving Really Fast’: Ionna CEO On 500 kW EV Chargers And Flagship New Location

‘We’re Moving Really Fast’: Ionna CEO On 500 kW EV Chargers And Flagship New Location

Every EV Motor Type Explained: They Aren't All The Same

Every EV Motor Type Explained: They Aren't All The Same

I Tried Mercedes' Answer To Tesla FSD. Here's How It Went

I Tried Mercedes' Answer To Tesla FSD. Here's How It Went

Tesla Model 3 Maintenance Guide: What Needs Servicing And What Doesn't

Tesla Model 3 Maintenance Guide: What Needs Servicing And What Doesn't

Latest Stories

RECOMMENDED FOR YOU



Chevy, GMC, and Cadillac EV Owners Can Now Plug And Charge At Electrify America



Rivian Is Inviting Owners To Beta Test Its New Point-To-Point Assisted Driving Tech



Tesla Drivers Can Now Plug In And Charge Automatically at Ionna Stations



REO Runabout vs. Slate Truck: Which Sub-$30,000 Truck Is Better?



BYD's Futuristic EV Charger Can Run On Sunshine And Batteries



Every EV Motor Type Explained: They Aren't All The Same



Mercedes’ EV Charging Network Hit 100 Locations After 3 Years In The U.S.