Tesla's 4680-Type Battery Cell Teardown: Specs Revealed
It appears to be an NCM 811 chemistry with very good energy density and total energy estimated at 96-99 Wh.
In the second part of the Tesla 4680-type cylindrical battery cell teardown and analysis, The Limiting Factor presents the initial specs and findings.
While the teardown video was very interesting, the second part, with new details, is even more interesting, as it confirms some of the rumors and includes surprises.
NCM 811 cathode, graphite anode
According to the video, Tesla's in-house produced 4680-type battery cell (acquired about six months ago) is equipped with a NCM 811 cathode chemistry. The material characterization indicates 81.6% nickel content.
The amount of cobalt and manganese has not been revealed, but it appears that there is no aluminum (so no NCA or NCMA type).
The Limiting Factor notes that the new dry battery electrode technology has not been used on the cathode, but it was on the anode. It was expected that it will be applied in both cases or none.
The analysis of the anode revealed that there is no silicon. The anode active material is graphite. That's another surprise, as usually 10-15% of silicon is added in the state-of-the-art lithium-ion battery anodes to boost capacity/energy density.
At this point, we can think that the analyzed cell might be a basic/early version in terms of chemistry and Tesla's new dry battery electrode technology.
Nonetheless, cell characterization reveals very good specs already.
Energy density: 272-296 Wh/kg
Tesla's 4680-type battery cell weight was 355 g. The estimated total capacity is 26.136 Ah, while total energy is estimated at 96-99 Wh (assuming at 3.7-3.8 V). That would be in-line with the rumor about 98 Wh capacity.
The energy density of the cell is estimated then at 272-296 Wh/kg, which is very good and basically comparable to the best cells on the market.
- 4680-type cylindrical lithium-ion battery (46 mm in diameter and 80 mm tall)
- cathode: NCM 811 (81.6% nickel)
- anode: graphite (no silicon), dry battery electrode technology
- tabless design
- estimated total capacity: 26.136 Ah
- estimated total energy: 96-99 Wh (assuming at 3.7-3.8 V)
- estimated energy density: 272-296 Wh/kg
- weight: 355 g
Troy Teslike noted in February 2022 that there is a rumor that the first-generation of Tesla's cell is 98 Wh. In the following years, an improved energy density is expected to offer higher energy: 108 Wh (up 10%) in 2023 and 118 Wh (up 9.3% from 108 Wh) in 2024.
The 4680-type cell already stores over 5-times more energy than the physically smaller 2170-type cell.
Considering the rumored total energy content, the energy density would be:
- 1st gen: 276 Wh/kg
- 2nd gen: 305 Wh/kg
- 3rd gen: 333 Wh/kg
In April, it was also pointed out that there might be two battery pack configurations with the 4680-type cells:
- Standard Range: 690 cells (69 x 10) and 67.620 kWh (at 98 Wh/cell)
- Long Range: 828 cells (69 x 12) and 81.144 kWh (at 98 Wh/cell)
20% more cells and energy
The pack total energy is interestingly close to the reported usable battery capacity of over 67 kWh in a Made-in-Texas (MIT) Tesla Model Y.
Let's also recall that the new MIT Tesla Model Y with 4680-type battery has not been listed as Long Range in EPA's documents, but simply as Tesla Model Y AWD and it has 15% less range than the version with 2170-type cells (279 miles vs. 330 miles).
Thick steel cell can
One of the interesting findings is that the new cell has a much thicker steel enclosure (cell can) than the 2170-type cell.
The reason behind that is most likely the necessity to carry forces in a structural battery pack.
It makes the 4680-type cell heavier. According to the video, the weight penalty is estimated at 10-15%.
- 2170-type: 125-250 μm
- 4680-type: 500-600 μm
But as we saw above, despite that, the energy density is comparable:
- 2170-type: 263-276 Wh/kg
- 4680-type: 272-296 Wh/kg
However, having a structural battery means that Tesla will be able to save weight on the car structure level, making the energy density on the car level noticeably higher. At least, that's what Tesla's CEO Elon Musk outlined during the Battery Day in 2018.
The Limiting Factor says that the new cell might have such competitive energy density (despite the heavy can and no silicon anode) thanks to the thickness of the electrodes (more active material).
The cathode thickness appears to be 20-25% higher in the case of the new cell:
- 2170-type (typically): 60-70 microns (0.06-0.07 millimeters)
- 4680-type: 85 microns (0.085 millimeters)
More research ahead
The analyzed cell was acquired about six months ago. In the next step, The Limiting Factor intends to get a newer cell from Munro Live, which is busy with its MIT Tesla Model Y battery teardown.
The cells from Munro's Model Y are expected to be updated compared to the cell analyzed here. At least externally, some changes were noted so there might be changes also inside.
The Limiting Factor promises a deep dive video with even more detailed results and a new series of tests of the Munro's cell.
All in all, the Tesla's 4680-type cylindrical battery cells are a real thing and very promising, with a lot of potential for further upgrades.
03:16 Energy Density
04:59 Handicap 1: Structural Battery Shell
05:38 Handicap 2: No Silicon
06:24 Equalizing for the Handicap!
06:57 Secret Sauce: Electrode Thickness
08:41 Munro Cells
09:40 What's Next?
- 5:50pm Chinese Start-Up’s Breakthrough Battery Technology Defies Cold Climate
- 3:23pm 2024 Chevrolet Equinox EV Seen Coming Off Assembly Line In Mexico
- 1:05pm Rivian’s New Enduro Drive Unit Boosts EPA Range
- 12:37pm Fazua Releases Major Software Update For Ride 60 E-Bike System
- 12:04pm Rivian Poaches Tesla's Global Manager For Raw Materials, Report Says
- 10:59am BYD Set Massive Plug-In Car Sales Record In May 2023: 240,000
- 10:53am Best Electric Car Leases And Finance Offers In June 2023 (UPDATE)
- 9:57am Rivian R1T Bursts Into Flames At Electrify America Station