Jaguar Land Rover presents at this year’s CENEX Low Carbon Vehicle event in the UK three prototypes (all-electric, plug-in hybrid and mild hybrid) developed together with

  • Zytek Automotive
  • GKN Driveline
  • Motor Design Limited
  • AVL
  • Drive System Design
  • Williams Advanced Engineering
  • Delta Motorsport
  • Tata Steel
  • Bristol University
  • Cranfield University
  • Newcastle University
Vehicles were built using new Drive Modules (eDM), which could enable design of any type of electrified vehicles.

According to Jaguar Land Rover, power/torque density of the eDM is twice as high as other production drivetrains, although the automaker didn't release any numbers to prove this.

We also don't know what Jaguar Land Rover's production plans are, as this particular project was part-funded by the UK government.

"Three Concept_e research demonstrators showcase this far-reaching future research, which includes a new unique high performance, modular electric drive module (eDM) developed in-house by Jaguar Land Rover. These are capable of producing twice the power and torque of any electric motor-generator in production today. These can be inserted between any engine and transmission to create MHEV or PHEV, or used alone for a BEV.

The Concept_e technologies are the output of an advanced powertrain research programme for state-of-the-art, next-generation hybrid and battery-electric powertrain technologies which began in 2013.

Led by Jaguar Land Rover, this two year £16.3m research project is part-funded by the UK’s innovation agency, Innovate UK1 and involves 12 UK technology partners2. It has brought together leading engineers and technologists from academia, the supply chain and industry to create a number of unique and innovative solutions."

As you can see above, the all-electric prototype, beside its sandwich battery floor, is equipped in two electric motors - front with single-speed transmission and rear with two-speed transmission.

"Concept_e BEV is a bespoke research demonstrator based on Jaguar Land Rover’s aluminium vehicle architecture. The underbody has been modified to mount the 70 kWh HV lithium ion traction battery and electric axle drive (EAD) units. The front drive unit features a single speed transmission coupled with an 85 kW electric motor. The rear drive unit features a twin speed transmission coupled with a 145 kW electric motor."

Concept_e BEV research

Concept_e BEV research

Then we have an all-wheel drive plug-in hybrid with an engine, motor and 8 speed transmission in the front. Lithium-ion battery finds a spot in the boot taking space in the trunk.

"Concept_e PHEV.  The Plug-In Hybrid employs a similar architecture to the MHEV but with a prototype petrol engine (300 PS) and 8 speed transmission longitudinally mounted within a Range Rover Sport donor vehicle. The electric motor is capable of up to 150 kW and also takes up the function of the starter motor. The motor draws electrical energy from a 320-volt lithium ion battery packaged in the boot. The hybrid powerplant drives through the conventional automatic gearbox normally fitted to the Range Rover Sport and the full time four-wheel drive system is retained."

Concept_e PHEV research

Concept_e PHEV research

"Concept_e MHEV. The Mild Hybrid is based on a Range Rover Evoque donor vehicle and features a prototype diesel engine (90 PS) and a 48V electrical system. It incorporates a 15 kW crank integrated motor with disconnect clutch within a hybrid module sandwiched between the engine and 9 speed transmission. The motor-generator is powered by an advanced 48-volt electrical system and 48-volt lithium ion battery pack."

Concept_e MHEV research

Concept_e MHEV research

Dr Wolfgang Epple, Director of Research and Technology, Jaguar Land Rover, said:

“This is a long-term Jaguar Land Rover research project exploring all aspects of future hybrid and battery electric vehicle technology. The three Concept_e vehicles will allow us to test and develop exciting new potential technologies that could form part of our low and zero emissions vision beyond 2020.

“The project is also helping to develop the UK’s skills and capabilities in alternative powertrains. We are serious about helping the UK become a world-wide leader in powertrain technologies.  Collaborative research programmes like this allow us to multiply the effect of our own R&D investment and nurture the UK’s technology supply chain.  This approach is helping to develop the skills and technologies that will make the UK even more competitive in the future.”

“Environmental Innovation is at the heart of our business. We have a wide-ranging low emissions technology strategy, which has created innovations like our Ingenium engine family and lighter vehicles. Technologies like these have already helped us reduce our fleet CO2 average by 25 per cent in recent years.

“Our future vision is to continue to reduce emissions and improve fuel efficiency while still delivering the luxury, performance, refinement and comfort our customers expect. Whether it’s optimising the internal combustion engine, advanced hybrid and battery-electric propulsion systems, the introduction of new, lightweight materials or the improvement of energy conservation through more efficient heating and ventilation technologies, we are leaving no stone unturned to ensure Jaguar and Land Rover vehicles emit significantly less emissions in the future.”

Dr Ruth McKernan, Chief Executive at Innovate UK said:

“The world-leading results of this collaborative R&D project not only justify our investment in the project, but promise significant economic benefits for the UK automotive industry and its supply chains. Our £230m investment in the sector over the past 8 years has helped the industry complete a remarkable turnaround, with the UK now seen as the pre-eminent global hub for automotive innovation.”

Got a tip for us? Email: