SiC-equipped Toyota Camry prototype

SiC-equipped Toyota Camry prototype

Toyota launched in Japan a test program to evaluate the performance of silicon carbide (SiC) power semiconductors (transistors and diodes) in power control units (PCUs) of a hybrid car and, in the case of FCVs, in the fuel cell voltage step-up converter.

According to the Japanese manufacturer, power semiconductors account for approximately 20 percent of total electrical losses. If the new SiC power semiconductors cut that loss significantly, efficiency (and range) of the cars will go up maybe even a few percent.

Another benefit would be downsizing of the components.

This month, Toyota will begin testing SiCs in a Camry Hybrid, while its hydrogen fuel cell bus already began tests in January. Real-world tests in Toyota City will last one year.

"Technology

Power semiconductors are found in power control units (PCUs), which are used to control motor drive power in hybrids and other vehicles with electric powertrains. PCUs play a crucial role in the use of electricity, supplying battery power to the motors during operation and recharging the battery using energy recovered during deceleration.

At present, power semiconductors account for approximately 20 percent of a vehicle's total electrical losses, meaning that raising the efficiency of the power semiconductors is a promising way to increase powertrain efficiency.

By comparison with existing silicon power semiconductors, the newly developed high quality silicon carbide (SiC) power semiconductors create less resistance when electricity flows through them. The technologies behind these SiC power semiconductors were developed jointly by Toyota, Denso Corporation, and Toyota Central R&D Labs., Inc. as part of the results of a broader R&D project* in Japan.

<em>Toyota FC Bus</em>

Toyota FC Bus

Test vehicles and period

In the Camry hybrid prototype, Toyota is installing SiC power semiconductors (transistors and diodes) in the PCU's internal voltage step-up converter and the inverter that controls the motor. Data gathered will include PCU voltage and current as well as driving speeds, driving patterns, and conditions such as outside temperature. By comparing this information with data from silicon semiconductors currently in use, Toyota will assess the improvement to efficiency achieved by the new SiC power semiconductors. Road testing of the Camry prototype will begin (primarily in Toyota City) in early February 2015, and will continue for about one year.

Similarly, on January 9, 2015, Toyota began collecting operating data from a fuel cell bus currently in regular commercial operation in Toyota City. The bus features SiC diodes in the fuel cell voltage step-up converter, which is used to control the voltage of electricity from the fuel cell stack.

Data from testing will be reflected in development, with the goal of putting the new SiC power semiconductors into practical use as soon as possible.

*Conducted by the R&D Partnership for Future Power Electronics Technology under consignment from the New Energy and Industrial Technology Development Organization."

Power control unit

Power control unit

Power control unit

Power control unit

"Using a "Camry" hybrid prototype, Toyota will bring a brand new technology to the streets of Japan for testing this year. The tests will evaluate the performance of silicon carbide (SiC) power semiconductors, which could lead to significant efficiency improvements in hybrids and other vehicles with electric powertrains."

"Brief presentation on Toyota's newly developed silicon carbide (SiC) power semiconductor for use in automotive power control units."