BMW takes us to the Leipzig plant where the new BMW i8 is being assembled. The behind the scenes videos give us a closer look at how BMW i8 is being built, from the body shop to the assembly and the dyno test.
The innovative vehicle architecture of the BMW i8 comprises two elements: the Life module, the passenger cell made of carbon fiber reinforced plastic (CFRP), and the aluminum Drive module, which incorporates the entire drivetrain and chassis technology. The LifeDrive concept and use of CFRP allows production times to be cut by half compared to those required for an equivalent car built along conventional lines. The process is less investment intensive as the high costs required for a conventional press shop and paint shop are no longer an issue and the Life and Drive modules can be manufactured alongside one another.
*Editor's Note: This post appears on BMWBLOG. Check it out here.
The BMW i production network comprises a plant in Moses Lake, Washington State, for the carbon fiber production and a plant in Wackersdorf for the processing into carbon fiber laminates. Both these facilities are operated by SGL Automotive Carbon Fibers (ACF), a joint venture set up by the BMW Group and the SGL Group. They are joined by the BMW Group’s own plants in Dingolfing, Landshut and Leipzig.